Powersafe L3 Panel Mount

$63.40$64.12

Need Help? Use the Powersafe Configuration Guide.

SKU: N/A Categories: ,

Powersafe L3 powerlock panel mount connector

Phase 3’s Powersafe panel mount connectors are the highest rated, safest and finest quality panel mounts are the highest rated, safest and finest quality powerlock type connectors as used for power distribution, aerospace, events, military and manufacturers. Panel Mounts are electrical industrial sockets for generators, batteries, busbars, switchgear and power distribution boxes. The powerlock panel mounts are available for all three phases plus neutral and earth. Powersafe Sockets have the same mechanical locking system as their inline counterparts; secure coupling of plug and socket is achieved through an innovative mechanical locking system that disengages with a simple release key. The electrical industrial sockets are compatible with other manufacturer’s powerlock panel mount connectors.

Connections are secured with an M12 threaded post termination to a standard cable lug. The industrial sockets are rated at 500 amps (T5). The standard connector is mounted to a panel through 4 fixing holes on the flange. As an alternative, flange holes can be fitted with M6 threaded inserts for either front or rear fixing.

  • 500A sockets are manufactured with brass with silver plating (400 amp – 500 amp)
  • Buy fully assembled with: gasket, M12 threaded post termination, M12 nut and spring washer.
  • L3 panel mounts are available in blue, grey and yellow.

Panel Mount Drain Connectors (SPD)

Phase 3’s powerlock drain (female) connectors are supplied fully assembled with a female contact and male thermoplastic insulator.

Panel Mount Source Connectors (SPS)

Phase 3’s powerlock source (male) connectors are supplied fully assembled with a male contact and female thermoplastic insulator.

Safety & Performance Features

  • UL Certified to 455A
  • Mechanically Keyed to eliminate the possibility of cross mating
  • Secondary Locking prevent unintentional uncoupling under load
  • Finger-proof protection against electric shock IP2X
  • Waterproof & Dustproof to IP67 rated
  • Color Coded for easy identification of three phase electricity
  • Innovative contact band allows higher rating (400A > 500A, 660A > 800A)
  • Contact band cannot come out
  • High Impact Insulator (no glass used & flame retardant)
  • Field Installation no special tools required
  • Gasket allows water tight securing to panel distribution boards

To Configure Your Connector:

  1. Select Gender
  2. Select Regional Color

Need Help? View our Powersafe Configuration Guide.

Powersafe power distribution devices are the perfect safe alternative to Camlock Connectors. All our devices are fully compatible with Litton VEAM, 400amp and 660amp powerlock panel mounts, ITT Cannon and other manufacturers.

Additional information

Weight 0.8 lbs
Dimensions 13 × 6 × 6 in
Gender

Male (source), Female (drain)

Termination (Amps)

T5 (455A)

Color

Blue, Grey, Yellow

Surge Current

75kA

Short Circuit Rating

Up to 35.5kA

Operating Current

1000V AC

Max Rated Voltage to Earth

2kV AC / 3kV DC

Minimum Flashover

9.5kV DC or AC Peak

Ingress Protection

IP67 (EN60529)

Electric Shock Protection

IP2X

Flammability

UL94-V0

Mating Cycles

>500

Temperature

-30°C to +125°C

close linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram